21
Service and Maintenance
5.
Lubricant
•
Change at specified service intervals.
•
Use only the types and grades recommended.
6.
Filler and Drain Plugs
•
Remove filler plugs and check level of lubricant at specified
intervals. Tighten filler and drain plugs securely.
7.
Capscrews and Gaskets
•
Check all capscrews, especially those on P.T.O. covers and rear
bearing covers for looseness which would cause oil leakage.
•
Check P.T.O. opening and rear bearing covers for oil leakage due
to faulty gasket.
8.
Shift Lever
•
Check for looseness and free play in housing. If lever is loose in
housing, proceed with check number 9.
9.
Shift Lever Housing Assembly
•
Remove air lines at slave valve and remove the shift lever hous-
ing assembly from transmission.
•
Check tension spring and washer for set and wear.
•
Check the shift lever spade pin and slot for wear.
•
Check bottom end of shift lever for wear and check slot yokes
and blocks in shift bar housing for wear at contact points with
shift lever.
