![background image](http://html1.mh-extra.com/html/eaton/flexi-3g/flexi-3g_installation-and-commissioning-manual_4069792011.webp)
Flexi -3G Installation & Commissioning Manual
Chapter 2. Flexi - 3G System General Description
Document No: - 4493-CM-EN-10989402
Page 11 of 94
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
2.2. Flexi – 3G Battery Cabinet Description
Fig. 2-4 Battery Cabinet
1
Side Panel LH
2
Side Panel RH
3
Rear Panel
4
Battery Support Bar
5
Battery Support Strap Kit
6
Floor Securing Bracket
10 Battery Cabinet Door
Note. Items marked thus
are optional, depending on requirements and order.
The Battery Cabinet is delivered as a flat pack unit and is assembled on site.
2.2.1. Battery Cabinet Dimensions
Battery Cabinet Rack Type
Width,
(mm)
Depth,
(mm)
Height,
(mm)
Battery Cabinet Rack 1150
600
450*
1150
Battery Cabinet Rack 1350
600
450*
1350
Battery Cabinet Rack 1470
600
600
1470
* Optional rack extension kit available to extend rack by 150mm increasing it to 600mm depth, thus
accommodating deeper batteries.
** As supplied with bottom battery shelf only and excluding optional door. Additional battery shelf
packs are approx. 2Kg each. Mass does not include Batteries.
For details of Cabinet Mass, see Appendix A. Cabinet Dimensions and Mass on page 74
1
4
3
2
5
6