background image

32

USER MANUAL FERNTEL IP4 / IP160

   March 2022   www.eaton.com

5.1.2.1 Directory input

The directory input dialog is used to create a new contact or to edit an existing contact.

5.1.2.1.1 Settings

Dialog settings to set the ring melody signaling (ringing) that is to be used when the subscriber indicated in the contact's 

Subscriber

 input parameter calls. 

5.1.2.1.1.1 Set ring melody for contact

Dialog settings to set the ring melody signaling (ringing) that is to be used when the subscriber indicated in the contact's 

Subscriber

 input parameter calls. 

Subscriber:............

Input parameter to specify the subscriber's name, under which the entry will be included in the 
alphabetically ordered contact list. The input field is located in the line below the designation 

Subscriber.

 

Number: 

1)

..............

Input parameter to specify the subscriber number and the optional DTMF characters, which are 
transferred to the destination phone after successful connection. The optional DTMF characters are to be 
placed after the subscriber number, separated by a comma.

4711

 

 

 // Subscriber number

4711,*101#

 

 // Subscriber number with following DTMF characters transmission

Name:

 1)

................

Input parameter to specify the subscriber's name, which manages the dialling information instead of the 
number (e.g. subscriber designation within the PBX used). 

Settings...............

Opens the settings dialog in which the ring melody behavior for the subscriber's calls can be set. 

Delete 

2)

...............

Deletes the current entry from the contact list.

1)

  To specify the dialling information, either the input parameter 

Number

 or the input parameter 

Name

 must be used.

2)

  The 

Delete

 command is only available if directory input was used to edit an existing contact.

After you have made your specifications, press the menu key 

 

  as many times as necessary until the text message 

Entry saved

 

appears.

Ringing:...............

Selection parameter for switching ringing on/off.

On

The acoustic ring melody signaling (ringing) is switched on.

Off

The acoustic ring melody signaling (ringing) is switched off.

Ring melody:...........

Opens the ring melody dialog, in which the melody, volume and speed of the ring melody signaling 
(ringing) can be set. 

 

5.1.2.1.1.1 Set ring melody for contact Page 32

Registration:..........

Opens the registration dialog, in which nothing can be set.

Start | Stop...........

Setting variable for starting and stopping the ring melody generator. Press the 

 

 key to start playback 

of the set ring melody and press it again to stop playback.

Melody:................

Selection parameter to specify the ring melody.

Default

Default melody

3tone 1 – 3tone 3

Triad tones 1-3

2tone 1 – 3tone 5

Two tones 1-5

tone 1 –  tone 2

Single tones 1-2

ringer

Ringer

Vol:...................

Selection parameter to set the volume.

Def

Default volume

1 - 11

Volume levels 1-11

Max

Maximum volume

Speed:.................

Selection parameter to set the playback speed

Def

Default playback speed

1 - 5

Playback speed 1-5

Max

Maximum playback speed

Summary of Contents for FernTel IP4

























































Reviews: