For more information visit:
www.EatonElectrical.com
Inside EZD
MN05013005E
404
EZSoft
EZSoft is a PC program for creating, testing and managing
circuit diagrams for EZD.
Use EZSoft to transfer circuit diagrams from your PC to EZD
and vice versa. Switch EZD to RUN mode from the PC to test
the program using the current wiring.
EZSoft provides extensive help on how to use the software.
X
Start EZSoft and click on Help.
The on-line help provides all additional information about
EZSoft that you will need.
If there are transmission problems, EZD will display the
INVALID PROG message.
X
Check whether you are using functions that the EZD device
does not know:
J
You should only transfer data between the PC and EZD
using the EZDPC interface cable, which is available as
accessory EZ800-PC-CAB.
J
EZD cannot exchange data with the PC while the circuit
diagram display is on screen.
INVALID PROG
J
If the operating voltage fails during communication with the
PC, repeat the last procedure. It is possible that not all the
data was transferred between the PC and EZD.
