Working with contacts and relays
For more information visit:
www.EatonElectrical.com
MN05013005E
137
A contact of a function relay is assigned the name of the
function block, the number and the contact function.
Example: contact of comparator function block
If the contact on a network station is used, the address of the
station is placed before the contact name.
Example: contact of an EZ-NET station
Coils
With a relay coil or function block select the coil function, coil
or function block name, coil or function block number as well
as coil of the function block. With coils of an EZ-NET network
station, the network address is selected before the coil name.
Example: relay coil output
Relay coil for timing relay function block with control coil
Relay coil of an EZ-NET station
CP01GT
Contact name
Contact number
Contact function
2RN02
Station address
Contact name
Contact number
S Q 04
Coil function
Coil name
Coil number
Ä T 04EN
Coil function
Coil name
Coil number
Function block
S2SN04
Coil function
Station address
Coil number
Coil name
J
A full list of all the contacts and relays is given in the
