4. Access to Maintenance and Personalization Data
Insert the
Solution-Pac
CD-ROM in the drive.
w
On the first navigation screen, select "Point to Point solution" and follow the instructions on how to install the
Personal Solution-Pac
software.
w
Then select "Settings", "Advanced settings" and "UPS settings".
Note that the Linux/Unix/MacOS versions of
Personal Solution-Pac
software do not offer this possibility.
It is possible to modify the settings listed below (detailed comments are available in the
Personal Solution-Pac
software).
Main-output personalization
Function
Factory setting
Other available settings
Output voltage on battery power
120 Volts AC
100/120/127 Volts AC
Overload alarm threshold
105%
30/50/70%
Voltage-threshold personalization
Function
Factory setting
Other available settings
High threshold for transfer to
battery
151 Volts AC ±3%
141 to 153 Volts AC
Low threshold for transfer to battery 89 Volts AC ±3%
80 to 94 Volts AC
Fader activation threshold
132 Volts AC ±3%
127 to 138 Volts AC
Booster activation threshold
102 Volts AC ±3%
92 to 108 Volts AC
Maximum input-voltage range
Disabled
Enabled
UPS-sensitivity personalization
Function
Factory setting
Other available settings
UPS-sensitivity level
Normal
High or low
86-81700-00EN A02 - Page 19
