NOTE 1
Select
End
when only two ePDUs are daisy-chained together.
NOTE 2
Select
Middle
when the ePDU (or ePDUs) are connected between a host and
another ePDU.
NOTE 3
Select
End
when assigning the last device in the chain when daisy-chaining three or
four ePDUs.
LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
57
5.
Press
ESC
to return to the previous menu.
Id:
Place:
0 (Host)
1 (Device)
0 (Host)
1 (Device)
End
Id:
Place:
1 (Device)
Middle
Middle
End
LCD
Discovery
Daisy Chain
Daisy Chain
Daisy Chain
Display
Daisy Chain
IPv4
Factory
Settings
ESC
Enter
Enter
Enter
Enter
ESC
Display
Daisy Chain
IPv4
Factory
Display
Daisy Chain
IPv4
Factory
Settings
Display
Language
Figure 62. Example Daisy Chain Device ePDU Setup
From the
Host
ePDU, set the values as follows (see Figure 63):
1.
On the Settings menu, scroll up or down to highlight
Daisy Chain
and press
ENTER
.
2.
Scroll up or down to highlight
Settings
and press
ENTER
.
3.
Select
0 (Host)
from the Id: selection drop-list. Press
ENTER
.
4.
Select
End
from the Place: selection drop-list. Press
ENTER
.
5.
Press
ESC
to return to the previous menu.
Id:
Place:
Middle
Middle
End
Daisy Chain
Enter
Host
0
Id:
Place:
1 (Device)
0 (Host)
0
(
Host
)
End
(
)
LCD
Discovery
Daisy Chain
Daisy Chain
Display
Daisy Chain
IPv4
Factory
Settings
ESC
Enter
Enter
(
)
Enter
ESC
Display
IPv4
Factory
Settings
Language
Daisy Chain
Figure 63. Example Daisy Chain Host ePDU Setup
