Eaton ePDU G3, Operation Manual

Page: 54 / 155

LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 46
Different sets of menus display depending on the type of topology you are managing or monitoring.
Table 6 shows LCD menus that are valid for ePDU topologies.
Table 6. Menus Available for ePDU Topologies
Models
Active
Alarms
Alarm
History
Meter
see NOTE 1
Settings
ePDU
Info
ePDU
Sections Outlets Control
Input
Phase
Total
Input (1)
Total
Input (2)
Basic (BA) — — — — — — — — — —
Metered Input (MI) • •
NOTE2
• — • — — • •
Metered Outlet (MO) • •
NOTE2
• — • • — • •
Switched (SW) • •
NOTE2
• — • — • • •
Managed (MA) • •
NOTE2
• — • • • • •
NOTE 1 The Meter > Environment menu is only available if an Environmental Monitoring Probe (EMP) is attached.
NOTE 2 The Input Phase menu is available if the ePDU has multiple phases.
NOTE 3 The Total Input (2) menu is available if the ePDU has multiple inputs
Active Alarms Menu
The Active Alarms menu filters and displays only active alarms for the ePDU. Active alarm screens have priority
over other screens. When an alarm occurs, the Active Alarms screen replaces the current screen and the
backlight blinks in red and white (see Figure 44). Up to 100 active alarms can display.
On the Main Menu, scroll up or down to highlight Active Alarms . Press ENTER to display the first active alarm
screen. Scroll up or down if needed to view active alarm data. When you finish your review, press
ESC
to return
to the previous menu. If the backlight was blinking red to indicate an active alarm, the backlight returns to
normal.
ESC
Enter
Down
No alarms
Active Alarms
ESC
Enter
Alarms History
Meter
Settings
Control
ePDU Info
Main Menu
Active Alarms
Active Alarms
CRITICAL
L3 over current
[12.000] 13.054A
09/05/2011
14:23:32
Active Alarms Active Alarms
WARNING
Over temperature
[25.00] 26.12°C
09/05/2011
14:23:32
Alarms History
Meter
Settings
Control
ePDU Info
Main Menu
Active Alarms
Figure 44. Example Active Alarm Displays