![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operation-manual_524480133.webp)
Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1
www.eaton.com/ePDU
125
3.
In the LDAP Server Global Parameters panel, select the following:
l
Encryption Method
: The Encryption method defines if an SSL connection is used between the ePDU
and the LDAP server when the LDAP requests are sent during the ePDU user authentication process.
From the drop-down list, select one of the following:
- None:
(No SSL connection) The data is sent without encryption. The standard port number is 389
(the port for no encryption). It can be set or modified from the LDAP Server Settings dialog.
- LDAPS:
(With SSL Connection) This selection uses an LDAP-over-SSL connection. The standard port
number is 636. It can be set or modified from the LDAP Server Settings dialog
- Start TLS:
(With SSL Connection) Use the “start TLS” extension (RFC 2830). The standard port
number is 389 (the same port that for no encryption). It can be set or modify from the LDAP Server
Settings dialog.
l
Bind Type
: The bind operation uses the LDAP user credentials to identify the LDAP authentication
connection between the ePDU and the LDAP server. From the drop-down list, select one of the
following:
- Simple:
The user credentials are sent without encryption. However, if an SSL connection is used, the
credentials are encapsulated in an SSL-encrypted connection.
- SASL Digest MD5:
Using MD5, a hash algorithm is used to encrypt the user credentials.
4.
To upload your AC Certificate, select
Browse
. Highlight the selected file and click
Open
.
!
IMPORTANT
The AC Certificate is the AC Certificate of the LDAP server, not the AC Certificate of the ePDU.
The certificate format is a Base64 encoded DER certificate, enclosed between the "-----BEGIN
CERTIFICATE-----" and "-----END CERTIFICATE-----" tag.In order to configure your LDAP server for
SSL, you need the AC certificate of the ePDU certificate.
NOTE
When uploading a file, you cannot write the file path in the text field. You must
select the file from the file explorer window that displays when you click
Browse.
5.
Click
Upload
.
6.
Click
Save
.
Modify LDAP Server Settings
1.
Access the Web interface and log in.
2.
Under Network and Security, select LDAP. The LDAP page displays.
3.
In the LDAP Server panel, click a linked host name. The LDAP Server Settings dialog displays.
4.
In the Enable Server drop-down list, select
Enable
or
Disable
to enable or disable the selected LDAP
server or servers.
5.
If enabled, you can choose to change the server name, the port number, and the number of seconds to
time out in the Server, Port, and Time Out (sec) entry boxes.
6.
Click
Save
. Otherwise, click
Cancel
to return to the LDAP page.