![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483057.webp)
LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
48
Operation Mode
Screensaver Cycling Sequence
The screensaver displays automatically after 30 seconds of inactivity from the start-up screen, a menu, or a
submenu. Values are reset every five seconds.The screensaver displays data in a preset 1Ph cycle (Figure 43)
or 3Ph cycle (Figure 44). These cycles are not user-configurable.
Figure 43. 1Ph Screensaver Cycle
Figure 44. 3Ph Delta-configured Screensaver Cycle
Startup Screen
When the ePDU powers up, the Startup screen displays (see Figure 45). Press
ENTER
to go to the Main Menu.
Figure 45. Startup Screen
14.8
Amp
Total Input
5 s
5 s
14/06/2013
15:55:26
192.168.123.123
P/N
5 s
5 s
5 s
5 s
8.61
Amp
Phase 1
1.47
Amp
Phase 3
3.26
Amp
Phase 2
14/06/2013
15:55:26
192.168.123.123
P/N
14/06/2013
15:55:26
192.168.123.123
P/N