![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483033.webp)
Installation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
24
Figure 21. Single or Side-by-Side Inboard
Upper Mounting Rail
Clip Feet Turned Upward for
Upper Mounting Rail
Clip Feet Turned Downward for
Lower Mounting Rail
Lower Mounting Rail
FRONT
Existing screws
in the U-channel
For One or Two Side-by-Side G3 ePDUs
NOTE: Side-by-side orientation
shown. Only one clip foot is
used for single G3 ePDU
installations.
8-32 screw and
keps nut
10-32 screw and
keps nut