![background image](http://html.mh-extra.com/html/eaton/epdu-g3/epdu-g3_operating-manual_524483138.webp)
Maintenance and Alarms
Eaton ePDU G3 Operation Manual P-164000277—Rev 5
129
Type Code 2 or 3 (ePDU or User)
Type 2 alarms and events are triggered from the ePDU. These alarms and events are primarily threshold
crossings when the operation measurement is beyond the threshold value range setting. Type 2 alarms and
events also provide the state of optional connected equipment.
Type 3 alarms and events are triggered from user actions.
1
02563
*Not used
1
02564
Wrong data type
1
02565
String too long
1
02566
*Not used
1
02567
*Not used
1
01025
*Not used
1
01026
Semantic error
1
01027
Impossible to open log file
1
01028
Impossible to write data in log file
1
01029
Impossible to seek data in log file
1
01030
Impossible to read data in log file
1
01031
Mutex not available
1
01032
*Not used
1
01033
Impossible to clear LOG file
1
03585
Initialization of SSH task failed
1
03076
Error writing in flash memory during an upload
1
03077
End signature of the uploaded file does not match
1
03078
Checksum of the uploaded file does not match
1
03586
Reading of the host key file (or table) failed
1
03587
Listening of SSH socket failed
1
03588
Acceptance of SSH socket failed
1
03589
Break received
1
03590
Max number of SSH connection reached
1
03591
Certificate error
1
03592
*Not used
1
04865
Error reading from the 12C Eeprom
1
04866
Error writing to the 12C Eeprom
1
03841
SNMP bad trap number
Table 10. OS or System Alarms and Events (Continued)
Type
Code
Identification Code
Alarm or Event