13
Technical Data
PR216-219-508-01
Effective March 2017
Installation and user manual for the
BiWire / Conventional Repeater
Connecting a Repeater Panel
If a single Repeater panel is being connected to the Fire Panel
then simply connect one end of the twisted pair cable to the
Repeater I/O terminals on the Fire Panel and the other end of the
cable to the Repeater I/O terminals on the Repeater Panel (see
Figure 15), observing correct polarity (+ to + ., - to -) .
When daisy chaining repeater panels together simply connect
another twisted pair cable between each Repeater I/O terminals .
This will mean that some of the terminals will have 2 cables
connected to it .
Once all the repeaters are wired together each repeater panel
needs to be assigned a unique address from 1 to 3 DIP switch 12
as shown below .
Figure 16. Interlink wiring diagram