3
3
1.
General
1.1. Intended applications
The EBT 01 allows the wireless data transfer (maximum range approximate 50 m) from
Internormen In-line units to external computers. It is intended for the transmission of stored
and actual measurement results from MPM 01, CCM 01 or WSTM 01 to an external
computer.
This manual contains informations and safety advices, which ensure risk free operations
and which help to keep the device in an ideal condition.
Therefore it is necessary that all people involved in operating the EBT 01 do note this
manual unconditionally.
1.2. General informations
Bluetooth is an industry standard according to IEEE 802.15.1 for the wireless short distance
data transfer ( up to 50 m outdoor
– depending on the used Bluetooth adapter on the
computer ).
The EBT 01 - module is a complete Bluetooth-solution, which consists of the Bluetooth
controller LMX9830, an antenna and complete integrated software protocol stack (Bluetooth
2.0).
The EBT 01 in combination with a commercial Bluetooth adapter is intended for wirelless
transmission of the stored results as well of the actual measurement results from an
Internormen In-line-display unit (MPM 01, CCM 01, WSTM 01) to an external computer.
2.
Installation
2.1. Installation of the EBT 01 in the In-line-display unit
Disconnect the In-line-display unit from the power supply.
Connecting of the EBT 01 with the display unit:
o
loosen the screws of the cover from the display unit and remove the cover.
