Eaton easySafety, Manual

Page: 622 / 695

ea s ySafety internal
618
02/16 MN05013001Z EN
Diagnostics-/-Error codes
Table 31: Diagnostic /Failure code, sorted by status number
Status number Plain text
Hexadecimal (0–F) decimal (0-9)
0000 0000 No Enable.
2001 8193 Enable issued; waiting for first (or only) input.
2002 8194 Waiting for second input.
2003 8195 Waiting for rising edge at Reset.
2004 8196 Waiting for falling edge at Reset.
2005 8197 Only one channel has been opened.
2007 8199 Waiting until feedback circuit closed.
2009 8201 Measurement started.
200A 8202 Operating mode can be selected.
200B 8203 Waiting for decreasing trigger signal; output not
active.
200C 8204 timing element running, output not active.
200D 8205 Timer stopped; output not active.
200E 8206 Waiting for inputs during startup testing.
2011 8209 Foot switch not operated (position 1).
2012 8210 Enable switch in OFF position
2013 8211 Foot switch in panic position (position 3).
2014 8212 Undefined foot switch position
2015 8213 Waiting for activation of guard locking.
2016 8214 Two-hand pushbutton in normal position.
2017 8215 Two-hand pushbutton 1: undefined position.
2018 8216 Two-hand pushbutton 2: undefined position.
201A 8218 Activate test signals
201B 8219 Check test signals T1 and T2 Off