Password protection
571
02/16 MN05013001Z EN
Master and safety password
The master password (+) must have been assigned before
the safety password is entered for the first time. Otherwise
this will be requested automatically.
Alternatively, you can call the master password as well as
the safety password (|) via the menus:
X
Press DEL and ALT to call up the System menu. Enter first
of all the S PARAMETERS menu and then enter the
PROTECTION menu. Press OK.
X
To set up the master password move to the M PASSWORD
menu or the S PASSWORD to set up the safety password.
X
Press OK once more to enter the password entry mode, in
the left hand example, for the master password.
If a master or safety password has not been entered, the
easySafety moves directly to the password display and
shows six dashes: indicating that there is no password set.
X
Press OK, six zeros will appear.
X
Set the password using the cursor buttons:
–
ú í
select position in the password,
–
ÍÚ
Select a value between 0 and 9.
– use
ú í
to select other positions in the password as
required and select a value between 0 to 9.
X
Press OK to save the new password. This also closes the
entry screen.
ENTRY
PASSWORD
------
M
PASSWORD...
S
PASSWORD...
ASSIGN
M
PASSWORD
â
-----
ASSIGN
M
PASSWORD
119345
Summary of Contents for easySafety
