Eaton EASY222-DN, User Manual

Page: 65 / 284

Read image data
61
09/10 MN05013007Z-EN
Read image data General information on working with image data
When writing the image data, it must be taken into account
that an image used in the easy/MFD program (e.g. inputs,
outputs,… ) is also written cyclically by the actual program.
Only the image data that is not used in the program and is
thus not written in the program cycle is unchanged. This
operation also means that an image written via the easyLink,
e.g. output data is only output to the physical outputs of the
easy/MFD if the control relay is operating in RUN mode.
Overview
Eingänge
lesen
Abbilddaten
werden
geschrieben
Ausgänge
schreiben
easy/MFD
Programmzyklus
(0 ... 20 ms)
Systemecke
Interrupt-Funktion
easyLink
(alle 12 bzw. 25 ms)
Abbilddaten
werden
geschrieben
Operands Meaning Read/Writ
e Attri-
bute ID Page
I1 – I16, P1 – P4,
ESC/OK/DEL/ALT „Digital inputs, P buttons and operating
buttons“ Reading 5C 62
I7 – I8 „Analog inputs: I7 – I8“ Reading 5B 65
T1 – T8, C1 – C8,
Ö
1 –
Ö
4, A1 – A8
„Timing relays, counter relays, timer
switch, analog value comparator“ Reading 5E 66
M1 – M16,
Q1 – Q8, D1 – D8 „Auxiliary relay (marker), digital outputs,
text display“ Reading 5F 69