Eaton EASY-RTD-DC-43-03B1-00 Manual Download Page 67

Page: 67 / 91

6. Operation

6.2 Device menus

6.2.6 Update

menu

This menu can be used to load a different firmware onto the easy-RTD.

Updates can only be carried out using the USB port.

Prerequisites
The easy-RTD settings in the Security menu must be configured in such a way that
updates are allowed.

Plug the USB drive with the update bundle into the easy-RTD device's USB port.

The latest update will be entered automatically.

Fig. 26: Update

Start update.
A firmware update security prompt will appear. Confirm by tapping "Start
update."

You will need to restart the easy-RTD after the update.

Restart the device.

easy Remote Touch display

06/21 MN048027EN Eaton.com

Summary of Contents for EASY-RTD-DC-43-03B1-00




























































































Search results

Summary of Contents for EASY-RTD-DC-43-03B1-00

Reviews:

Related manuals for EASY-RTD-DC-43-03B1-00

Brands by name

Popular brands

Eaton EASY-RTD-DC-43-03B1-00, Manual

Search results

Summary of Contents for EASY-RTD-DC-43-03B1-00

Reviews:

Related manuals for EASY-RTD-DC-43-03B1-00

Brands by name

Popular brands