Operating instructions
Digital display with analog inputs
E5324E Series
1. Description
• 5 digit digital display with analog inputs
• LED-Display with 8 mm [0.31 in] high
characters and very high luminosity
• Display range -19999 – 99999 with leading
zero blanking
• Programming of functions and operating
parameters via the setting keys. During pro-
gramming the display guides the user with text
prompts.
• Programmable features:
Range
Max. value display yes/no
Max. value reset yes/no
Min. value display yes/no
Min. value reset yes/no
Decimal point
Min. input signal
Displayed value at min. input signal
Max. input signal
Displayed value at max. input signal
2. Inputs
LATCH (Connect 4)
Static input to freeze the displayed value.
If this input (pnp) is supplied with
4 – 30V DC, the actual value is frozen
until the input is released or the signal
level gets below 2V DC. The calculating
of max. and min. value is not af fec ted.
CURRENT INPUT (Connect 5)
Analog current input with reverse connec-
tion pro tec tion and current limitation to
max. 50 mA. Connect the signal line with
the signal with this input.
CAUTION: To prevent interfering signals
caused by the supply voltage, this input is
isolated from the supply voltage. Connect
the signal line with the - Signal to the ana-
log reference input.
ANALOG GND
(Connect 6)
If no isolation between measuring circuit
and supply voltage is necessary, connect
pin 2 or 3 to this input.
VOLTAGE INPUT
(Connect 7)
Analog voltage input. Connect the signal
line with the analog + signal with this
input. In case of reverse connection, the
display shows “Err4”.
CAUTION: To prevent interfering signals
caused by the supply voltage, this input is
isolated from the supply voltage. Connect
the signal line with the - Signal to the
ana log reference input.
deutsch
français
english
español
MN05401008E
1
