
Table of Contents
Safety Messages and Proper Use of the E-Series Family Quick Start Guide
Proper Use of the Device and of This Manual
Quick Start – Operating Software PowerPort-E
Setup of the Connection PC – Protective Device
Connect a Protective Device to a PC via USB
Connect a Protective Device to a PC via Ethernet (TCP/IP)
Serial RS232 Connection with Protective Device (up to Release 2.4)
Serial RS232 Connection to a PC
Serial RS232 Connection to a PC without an RS232 Connector
Receive Settings from the Protective Device
Change Settings in the Protective Device
Quick Start – Operation via Panel
“Info” key – Check LED Assignments
“Ack/Rst” key – Reset (Acknowledge) Latched Signals, Relay Outputs, Trip
Commands
“CTRL” key – Control Switchgear Devices
Control Lockout Relays via Panel – Example of a Switching Operation
3
www.eaton.com
E-Series Family Quick Start Guide
Table of Contents