manualshive.com logo in svg

Eaton Digitrip 3000 series, Installation, Operation And Maintenance Instructions

Share
Download
Eaton Digitrip 3000 series Installation, Operation And Maintenance Instructions Download Page 72

Instruction Leaflet

DT3000

Page 68

Effective:  Date 07/02

I.B. 17555D

For more information visit:

 

www.cutler-hammer.eaton.com

Supersedes I.B. 17555C dated November 1999

compressed position. The device can now be secured in
the enclosure by inserting a utility locking ring in the
provided slot.

A6.2 REMOVING THE RELAY

 REMOVAL OF THE DIGITRIP 3001 INNER
CHASSIS FROM THE DRAWOUT OUTER CASE
EXPOSES LIVE PARTS, WHERE THE HAZARD OF
A FATAL ELECTRIC SHOCK IS PRESENT.
ALWAYS DISCONNECT ANY CONTROL OR
SOURCE POWER BEFORE TOUCHING ANYTHING
ON THE INTERNAL OR EXTERNAL PARTS OF
THE DRAWOUT OUTER CASE.

When removing the Inner Chassis from the Drawout Outer
Case, first remove any locking ring that has been installed.
Press the top and bottom quick release buttons
simultaneously, and pull the relay out by its front panel.

WARNING

Summary of Contents for Digitrip 3000 series




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands