Eaton
│
Cutler-Hammer
The Cutler-Hammer CHMDDS4 Satellite Distribution Module provides distribution
of KU Band Satellite TV to 4 satellite dish receivers. Please be sure to review this
installation guide carefully prior to installation.
Installing the CHMDDS4 Satellite Distribution Module
Distributing Satellite TV only
1. Run 2 RG6 coax cables from the Satellite Dish to the CHMDDS4
satellite distribution module. One will be designated as LNB A and the
other as LNB B.
2.
Connect the LNB A and LNB B RG6 coax cables coming from the
Satellite dish to the SATV inputs on the rear of the CHMDDS4
satellite distribution module.
Satellite LNB A Input
Satellite LNB B Input
3. Connect the RG6 coax cable running to the Satellite Receivers in the
rooms to the outputs on the front of the CHMDDS4 satellite
distribution module. If you are using a CHMDP3 patch module, use
coax patch cords to connect the zones and the outputs.
4 Outputs
CHMDDS4 Installation Guide
Page 1
