I.L. 17567
Effective January, 2000
Page 2
REMOTE MOUNTING OF THE IQMSSPM
In those cases where it is necessary to mount the
IQMSSPM separately from the chassis, be sure that:
(1)
The location allows for a cable connection
between the meter chassis and the IQMSSPM by means
of a 45-inch extension cable (IQA45CABLE).
(2) The IQMSSPM physical dimensions are shown
in the Fig. 2 below.
To mount the IQMSSPM, use the module as a drilling
template at the new location. The two #8-32 screws can
be used to remount the module in holes that are
properly drilled and tapped.
Reconnect all wires to the IQMSSPM and meter —
tighten all screws.
Fig. 2
Power Module Physical Dimensions and Mounting Holes
