Eaton CurrentWatch ECS7 Series, Instruction Leaflet

Page: 3 / 4

Overload Only Models
Amps
Output Open
(LED Off)
Output Closed
(LED Slow)
115% of Calibration Point
Calibration Point
(LED Fast)
Ranges and Maximum Amps
Housing Range
Maximum Amps
Continuous 6 sec.
1 sec.
Solid Core 1.5-150 A 500 A 500 A 1,000 A
Split Core 2.8-150 A 500 A 500 A 1,000 A
Troubleshooting
Problem Solution
Switch is
always
tripped.
Switch may have been overloaded and contacts are burned out.
Check the output load, remembering to include inrush on inductive
loads (coils, motors).
Switch will
not trip.
For split core models, the core contact area may be dirty. Open the
sensor and clean the contact area.
Switch may have been overloaded and contacts are burned out.
Check the output load, remembering to include inrush on inductive
loads (coils, motors).
Make sure function switch is in “RUN” mode.
Specifications
Specification Value
Power Supply Self Powered–No Power Supply Needed
Output Magnetically Isolated Solid State Switch
Output Rating Normally Open (N.O.) Models: 0.30 A @ 135 VAC/DC
Off-State Leakage < 10 µA
Response Time 200 ms
Setpoint Overload Only Models: +15% of Load
Underload Only Models: -15% of Load
Over/Underload Models: ±15% of Load (Operating
Window)
Setpoint Ranges Solid Core: 1.5-150 A
Split Core: 2.8-150 A
Hysteresis Approx. 5% of Setpoint
Isolation Voltage UL Listed to 1,270 VAC, Tested to 5,000 VAC
Frequency Range 6-100 Hz
Sensing Aperture Solid Core Models: 0.75 in. (19 mm) dia.
Split Core Models: 0.85 in. (21.7 mm) sq.
Housing UL94 V0 Flammability Rated
Environmental Operating Temperature: -4 to 122°F (-20 to +50°C)
Humidity: 0-95% RH, Non-Condensing
Approvals UL Listed, E117028
UL tested to Canadian safety standards
CE
RoHs Compliant
Over/Underload Models
Amps
Output Open
Output Open
(LED Off)
Output Closed
(LED Slow)
115% of Calibration Point
(LED Fast)
85% ofCalibration Point
(LED Slow)
Current Switch Operation
Model Output Diagram
Underload Only Models
Amps
Output Open (LED Off)
Output Closed (LED Slow)
Output Open (LED Fast)
Calibration Point
3
EATON www.eaton.com
Instructions Publication P51922
Effective July 2017
CurrentWatch™ ECS7 Series Current Switches
Self-Calibrating AC Current Switches
with Solid State Outputs