Eaton Current-Limiting Reactor, Installation Manual

Page: 19 / 32

Eaton Current-Limiting Reactor (2500A) Installation Manual P-164001115—Rev 02 11
C Chhaapptteerr 44 P Poow weerr C Caabblliinngg
44..11 C Caabbllee EEnnttrryy
44..11..11 C Caabbllee EEnnttrryy P Paanneellss
The Current-Limiting Reactor has (2) top and (2) bottom cable entry panels. Installers can create up to (5) 4.0"
[102 mm] cut-outs in each panel. The unit supports internal cable bend radius for cables up to 600 MCM.
Figure 6. Cable Entry Panels
36
"
(914 mm)
TOP VIEW
46
"
(1168 mm)
Top Conduit Panels
are 33.5
"
x 8.0
"
(851 x 203 mm).
46
"
(1168 mm)
BOTTOM VIEW
Bottom Conduit Panels
are 28
"
x 6.5
"
(711 x 165 mm).
44..11..22 S Siiddee C Caarr C Caabbllee EEnnttrryy
When installing an Current-Limiting Reactor over existing conduit in the concrete floor, conduits may not align
with the bottom cable entry panels. The Current-Limiting Reactor can have an optional side car that provides
additional cable entry space to enable conduit installed in the concrete floor to correctly align with cable entry
panels.
The side car interior is open with no panels between the side car and the Current-Limiting Reactor bus bars,
providing easy access to bus bars.