DRAFT - 07 March 2016
DRAFT - 07 March 2016
INM MTL GECMA WS display rev 2
31
You can make a test drawing to check how precise the calibration was.
If calibration was effective you should see what you have written on the screen. It is
important to check that all the corners of the screen have been reached during the
calibration process.
Check also that the controller is using the correct driver (it should use the
eGalaxTouch driver and not Windows Universal driver).
Go to the
“Device manager”
screen in your
“System”
settings.
Right-click the item under the
“Mouse and other pointing devices”
heading and
choose
“Properties”
.
The Driver tab should show the provider as
“eGalaxTouch”
.
