35
Compass
Installation Manual
COMPASS INSTALLATION MANUAL
www.eaton.com/compass
Install Linear and Corner Overhead
Compartment Shells
Overhead compartment shells attach between 36
inch uprights and 65 inch legs above back panels.
Compartment shells are delivered unassembled. One
overhead compartment shell includes a rear panel,
two side support panels, a shelf, and a top panel; to
be installed in that order.
Compartment shells of 60 to 72 inches wide include a
center shell partition. Compartment shells of 42 to 54
inches using three cabinet doors use an intermediate
shell partition included with the cabinet doors.
Installation is described in this section.
Only one overhead compartment shell can be
installed per corner. The overhead compartment shell
can be installed on the left or right side.
Requirements:
•
Installed legs, stretchers, organizer uprights and
panels
Components:
•
Overhead compartment shells
Hardware - COMPKIT1
•
1
⁄
4
-20 X
3
⁄
4
hex head machine screws
•
#10-24 x
3
⁄
8
self tapping screws
Tools required (not included)
•
Powered driver
•
3
⁄
8
hex socket
•
Socket extension
•
#2 Phillips screwdriver
CAUTION
Note:
Components can become unstable during
assembly. Use caution when installing overhead
compartments and shelves.