3
Carrel Organizer
EATON
www.eaton.com
Technical Data
Instruction Sheet
IL211005EN
Effective May 2018
Fastening the organizer to a LINX worksurface
(continued)
4. With two people, carefully lift and place the
Organizer on the worksurface with the bottom
of the Uprights fitting down over the Mounting
Brackets.
Secure the Uprights to the Mounting Brackets
with the six
1
/
4
"-20 x
1
/
2
" Button head cap screws
provided. Tighten the screws with the
5
/
32
" Allen
wrench. See figure 4.
5. Install the two
Top Caps
as shown in figure 4. First
install three
Plasi-grommets
into the square holes
in the top of each upright. Next, install the Top
Caps using the six
1
/
4
"-20 x 1.00" flat head screws.
IMPORTANT!
The Linx Organizer must be fastened
to the worksurface.
Figure 4
89072 3
