Eaton BreakerVisu NZM-XMC-MDISP35-MOD, Manual

Page: 38 / 88

2 Operator interface
2.7 “Extras” screen
36
BreakerVisu 06/16 MN01210001Z-EN www.eaton.com
Table 36: Controls – Available device types (3.5“ variant)
Figure 30:Add more device types (3.5“ variant)
Table 37: Controls – “Add more device types” (3.5“ variant)
Figure 31:“Extras” screen – Security (3.5“ variant)
Control Action
The License needed box indicates that the system is missing the license
required for managing configurable device types. Accordingly, the Add
more device types button will be disabled.
As soon as the license is provided, this text will disappear.
Additional information ￫ Chapter 8, “Licensing”.
Tap the Add more device types button to open the corresponding
screen. The feature must be licensed in order for this to work – otherwise,
the button will be disabled.
Control Action
The AUX TYPE boxes contain basic information regarding the
custom devices defined by the user: name, type, and number
of device parameters. Tap the checkmark button to select a
3rd party device. To delete the selected 3rd party device, tap
the
DELETE DEVICE button.
Tap the Import New button to start reading and configuring
custom device types. The Help message box will show a
flashing circle to indicate that an import process is in
progress. The system will also display help messages to
provide you with instructions or with the process' progress.
Finally, “Last error” will show the process‘ result.
Additional information ￫ Chapter 9, “Importing 3rd party
Modbus devices”.
Tap the “back” button to go back to the overview of available
device types.