Eaton BladeUPS none, User Manual

Page: 110 / 160

96 Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14
Table 11. Indicator and Status Description
Indicator Status
Description
UPS OPERATION
MODE
Green
On The UPS is operating normally.
Flashing
• The UPS is starting up or is shut down and waiting for power to return.
• A new information message is active.
• Bypass is not available.
Off The UPS is turned off and will not turn on automatically.
BATTERY MODE
On The UPS is in Battery mode.
BYPASS MODE
Yellow
On The UPS is in Bypass mode.
ACTIVE ALARM
MODE
Red
On The UPS has an active alarm.
Flashing There is a new UPS alarm condition. See “Troubleshooting” on page 133 for
additional information.
55..33 C Chhaannggiinngg TThhee LLaanngguuaaggee
Press and hold the first button on the left for approximately five seconds to select the language menu. This
action is possible from any LCD menu screen.
55..44 D Diissppllaayy FFuunnccttiioonnss
The LCD displays the Start screen at startup. During operation, the Start screen also displays after 15 minutes
of inactivity. The display is user-selectable: the default is the Eaton logo, but this can be changed to the Mimic
screen in the User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press any button to restore the screen.
Press any button to activate the menu options. Use the two middle buttons ( and ) to scroll through the menu
structure. Press the button to enter a submenu. Press the button to select an option. Press the
ESC
button to cancel or return to the previous menu.
NOTE Menu functions related to parallel systems appear only on paralleled UPSs.
Changing The Language