Installation
Eaton BladeUPS 12 kVA Maintenance Bypass Cabinet Installation and Operation Manual P-164000130—Rev 1
www.eaton.com/powerquality
3-3
2.
Locate the vent covers at the bottom of the front and back door (see Figure 3-1). Using a nut driver,
remove the two
1
/
4
–
20
x
1 1/2-inch hex head screws that secure each vent cover.
3.
Remove and retain the vent covers and screws for reinstallation.
1/4” Hex Head
Screws
Figure 3-1. Removing the Vent Cover on the Front Door
Summary of Contents for BladeUPS none
Page 65: ......
Page 66: ...164201690 4 P 164000130 1...
