5
Call point BG3
English
Call point BG3
TM177.D February 2022 www.eaton.com
5.0 Certification/approvals
(EEx ia units only)
Certified to: EN50014, EN50020 & EN50284
EEx ia unit ATEX certification No. BAS000ATEX1067X
EEx ia IIC T4 (Tamb. -55°C to +55°C)
Unit parameters are as follows:
Ui = 29V
Ii = 147mA
Pi = 800mW
The certificate and product label carry the ATEX group and
category marking:
Ex
II 1 G
Where:
Ex
Signifies compliance with ATEX
II
Signifies suitability for use in surface industries
1
Signifies suitability for use in zone 0
G Signifies suitability for use in the presence of gases
These units also have the following approvals:
Ingress protection (IP66 & 67) to BS EN 60529:92
6.0 Special conditions for safe use
When the unit is constructed or coated in a
non-conductive material, precautions should be taken to
prevent the build up of electrostatic charges
Clean only with a damp cloth.
Apparatus constructed in such a manner can be identified
by a warning label.
