Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2018 Eaton
All Rights Reserved
Printed in USA
Publication No. IL210024EN
May 2018
Eaton is a registered trademark.
All trademarks are property
of their respective owners.
3
S e r v i c e P u l l o u t
I n s t a l l a t i o n
91712
GLASS INSTALLATION
1. Carefully unpack the Glass Panel (located under the
drawer) and position it on the flange at the bottom of
the opening in the Drawer front. See figure 5.
Drawer front
Glass Panel
Flange
Figure 5
Figure 6
Service Pullout
2. Hold the Glass Panel in place and install the two
Glass Retainers onto the threaded studs located on
both sides of the Drawer front. See figure 6. Slide
the retainers against the Glass Panel and secure them
using the four 1/4”-20 Kep nuts provided.
1/4”-20 Kep nuts
Glass Panel
Glass Retainers
Threaded studs
3
S e r v i c e P u l l o u t
I n s t a l l a t i o n
91712
GLASS INSTALLATION
1. Carefully unpack the Glass Panel (located under the
drawer) and position it on the flange at the bottom of
the opening in the Drawer front. See figure 5.
Drawer front
Glass Panel
Flange
Figure 5
Figure 6
Service Pullout
2. Hold the Glass Panel in place and install the two
Glass Retainers onto the threaded studs located on
both sides of the Drawer front. See figure 6. Slide
the retainers against the Glass Panel and secure them
using the four 1/4”-20 Kep nuts provided.
1/4”-20 Kep nuts
Glass Panel
Glass Retainers
Threaded studs
Glass installation
1. Carefully unpack the Glass Panel (located under the
drawer) and position it on the flange at the bottom
of the opening in the Drawer front. See figure 5.
2. Hold the Glass Panel in place and install
the two Glass Retainers onto the threaded
studs located on both sides of the Drawer
front. See figure 6. Slide the retainers
against the Glass Panel and secure them
using the four
1
∕
4
"-20 Keep nuts provided.
Glass panel
Drawer front
Service pullout
Figure 5
Threaded studs
Glass panel
Glass retainers
1
∕
4
" - 20 kep nuts
Figure 6
Flange
