VC 5000
6
©Copyright Eaton Corp., 2019. All rights reserved.
SINGLE NARROW & SINGLE WIDE
DUAL NARROW
DUAL WIDE
Figure 3
2.1.2
Figure 4
illustrates the gap-mounting arrangement
with an axial locking device. The axial locking
device restricts the relative axial motion between
the driving and driven shafts. This arrangement is
typically used where a synchronous motor armature
with plain bearings must be held on magnetic
center.
2.1.3
Figure 5
illustrates a typical VC brake application.
The drum and drum hub are attached to the shaft
which is to be stopped. The element is attached to
a rigid reaction bracket.
Figure 4
Figure 5
2.1.4
Figure 6
illustrates a typical marine main
propulsion application. In this arrangement, the
element is attached to a pinion adapter plate and
the drum and drum hub are attached to a quill shaft.
A manifold is attached to the outboard end of the
element for bearing support of the quill shaft.
Figure 6
