Warning -
Intellectual Property Rights
Eaton wishes to make it clear that it owns intellectual property rights in the
product which it manufactures (whether or not listed in this leaflet) and that
it will take legal action against any party found to be manufacturing, using,
or selling any article which infringes the company’s intellectual property. All
marks in this document identified with an R symbol or a TM symbol adjacent
to the mark are trademarks of Eaton.
2004 Eaton Electric Limited.
All rights reserved.
C
TCPD1633
FIXING AND KNOCKOUT POSITIONS
38 mm
25 mm
1
12 mm
125.5 mm
1
17.5mm
100 mm
(7-20/25mm
CONDUIT KNOCKOUT)
18 mm
(3 X 6.0 DIA FIXING HOLES)
29 mm
OVERALL DIMENSIONS
129.2 mm
105.8 mm
159.4 mm
28.5 mm
(30.0 mm)
(223 mm)
(165.0mm)
(41.mm)
(168.5 mm)
(154 mm)
(172 mm)
(141mm)
(47 mm)
6-20mm
CONDUIT KNOCKOUT
2 X 6.0 DIA FIXING HOLES
=
=
(137 mm)
(80.0 mm FIXING HOLES)
DIMENSIONS IN BRACKETS REFER TO
TYPES 2528ADS(2X) & 3228ADS(3X) SIZED
ENCLOSURES
The use to which this product is put and its place of installation is outside our
control. Particular care should therefore be taken to follow the instructions given
here and to ensure their continued availability in conjunction with the use of the
product.
No responsibility can be accepted by us if these instructions are disregarded.
Further copies of these instructions and information concerning the installation
and proper use of this product can be obtained by contacting the:
Technical Services Department
Eaton Electric Limited, Reddings Lane, Tyseley, Birmingham B11 3EZ.
Tel: +44(0)8700 545 333, Fax: +44(0)8700 540 333
Tel: +44(0)121 685 2100, Fax: +44(0)121 706 2012
email: [email protected]