Keep the operating environment within the parameters stated in this
document.
Keep the surroundings of the UPS uncluttered, clean, and free from excess
moisture.
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside
and outside of the equipment.
2.1 Audience
The intended audience of this document is as follows:
• People who plan and perform the installation of the UPS system
• People who use the UPS system
This document provides guidelines for how to check the external battery cabinet
delivery and how to install and operate the cabinet.
The reader is expected to know the fundamentals of electricity, wiring, electrical
components and electrical schematic symbols. This document is written for a
global reader.
2.2 CE marking
The product has a CE marking in compliance with the following European
directives:
• LV Directive (Safety) 2014/35/EU
Declarations of conformity with UPS harmonized standards and directives IEC
62040-1 (Safety) is available at www.eaton.eu or by contacting your nearest
Eaton office or authorized partner.
2.3 User precautions
For the external battery cabinet, the only permitted user operation is to turn the
battery circuit breaker on or off. There are no permitted user operations for the
transformer cabinet.
Follow the precautions and only perform the described operations. Any deviation
from the instructions can be dangerous to the user or cause accidental load
loss.
DANGER
Do not open any screws in the unit. Failure to follow the electrical precautions
can be fatal.
Eaton 9PHD Accessory Cabinets TFC-A, EBC-F
and EBC-G
User's and installation guide
©
Eaton Corporation plc 2022. All rights reserved.
Document ID: P-164000538
10 (63)