3
QD8 Quik-Drive Tap-Changer Motor Replacement Kit 57A63675100A
INSTALLATION INSTRUCTIONS
MN225038EN
June 2016
Motor Pivot
Stud
Belleville
Washer
Motor Pivot
Locknut
Figure 5. Motor pivot stud
Molded Back
Panel
Motor Located
in the Motor
Relief Area of
the Back Panel
Figure 6. Removal of the motor
7.
Remove the chain from the motor sprocket and set it
on the brake assembly as shown in Figure 7. Lift the
motor out of the relief area.
Chain
Brake
Assembly
Figure 7. Removal of the chain
8. Remove the four screws securing the motor to the
motor mounting plate using a 1/4" socket on a ratchet.
Remove the motor mounting plate from the old motor.
Refer to Figure 8.
Motor
Mounting
Plate
Motor
Mounting
Plate Screw
Figure 8. Removal of the motor plate
