Eaton Compressor 5HP, Manual

Page: 21 / 22

20
5HP INLINE PUMP MANUAL REV030921
Warranty Statement
•
Standard Warranty:
That each compressor bare pump is free from defects in material, workmanship, and parts for *1 year from
the date of delivery. Manufacturer is not responsible for downtime during warranty service. If downtime is necessary, it is at the
owner’s discretion, obligation, and expense, to have a redundant compressor. After one year, purchaser is required to return pump
to manufacturer to avoid core charge. Parts shipped for warranty repairs shall only include ground freight charges for the first 90
days of the warranty period, thereafter owner is responsible for all freight charges of parts and/or total pump replacement if
necessary being shipped for warranty fulfillment. Any and all express shipping charges of warranty parts would be at the owne
r’s
expense. Standard technical assistance is provided at no charge during and after the standard warranty period.
*Standard warranty has no obligation to maintain warranty status, warranty will expire one year from date
of delivery. Please see available options below to extend your warranty.
•
5 Year Extended Warranty: Manufacturer will extend your standard 1-year warranty to full 5 years when you opt to register for the
extended warranty plan that includes using our SMART OIL ™ and following all routine maintenance set forth. Parts shipped for
warranty repairs shall only include ground freight charges for the first 90 days of the warranty period, thereafter owner is
responsible for all freight charges of parts and/or total pump replacement if necessary being shipped for warranty fulfillment. Any
and all express
shipping charges of warranty parts would be at the owner’s expense. This plan includes our advanced technical air
support. Smart Tech Support provides you with the highest level of technical support.
Required maintenance schedule to maintain warranty status.
➢
All pumps are shipped with break-in oil and must be changed no less than 70 hours to insure gasket seating.
➢
After the 100 hours of break-in, you must change the oil.
➢
Thereafter Oil Should be changed every 6 months or 1000 hours whichever occurs first.
➢
Always maintain proper oil level in unit. If the unit runs out of oil due to neglect the warranty will be void.
➢
Use only Eaton approved oils in your pump, or your warranty is void.
➢
All stock orders by vendor/purchaser are required to buy two service kits at the time of purchase.
➢
All stocking orders will have a 6-month grace period for warranty registration. After that time, the unit must be registered, or
warranty may be void.
Warranty shall not apply, and manufacturer shall not be responsible nor liable for:
•
Routine service such as oil changes, filter replacements, gasket tightening to correct oil seepage or drive belt tightening and valve
cleaning and are not covered under warranty.
•
Consequential damages such as but not limited to cost of loss of business, product damage, or down time.
•
Acts of nature, over abuse, malicious destruction, improper maintenance, undersized equipment
•
Deviation from operating instructions or specifications
•
Exceeding 70% duty cycle resulting in overheating and excessive wear and tear
•
Any malfunction of reciprocating pump caused by failure or improper use and/or maintenance of other compressor components
manufactured by others.
•
Normal wear and tear parts included but not limited to valves (intake/suction, check, blowdown, thermo, pop off, unloader), and ball
valves. Belts, shaft seals, load/unloader solenoids, sensors (temperature or pressure), Electrical contractors and relays, and any parts
with a routine maintenance schedule
Warranty shall be voided under the following conditions
: Exposing electrical components to rain or
water or
installing the unit in a
hostile environment such as acid vapors or any caustic or abrasive matter that may be ingested into the pump or installing the unit in an enclosed
area where lack of cooling ventilation is present, such as in boiler or equipment rooms where the ambient air exceeds 110F.
Further exclusions include failure to fully and completely follow the guidelines set forth in the manual. Of specific note is