11
d)
Tonearm output connection
Connect the tonearm cable provided with the accessories to the RCA tonearm output that is
located at the rear of the turntable, behind the tonearm. Connect the grounding cable on the
earth connection screw.
e)
Vertical Tracking Angle setting (VTA)
To set the Vertical Tracking Angle, first put a record on the platter. When the needle is lowered
into the record groove, the tube of the tonearm should be parallel to the surface of the record.
If it is not, loosen both hexagonal screws in the tonearm base just enough to allow vertical
movement of the arm pillar without force, and slide the arm up or down until it is parallel.
Carefully and evenly retighten the hexagon screws
without applying excessive force
(which
could deform the arm pillar).
