![EAT MY DUST LF1200DT User Manual Download Page 18](http://html.mh-extra.com/html/eat-my-dust/lf1200dt/lf1200dt_user-manual_524211018.webp)
Australia's Favourite Electric Motorbike
100% electric
#BETHECHANGE
18
Maintenance of Lithium Battery
1. Battery capacity will gradually decrease as the use of time and mileage
increases. The correct use and maintenance can effectively extend the life
of the battery.
2. Please charge lithium battery fully before first using newly purchased
electric motorcycle. First requirement when using battery recharged again
after use controller under-voltage protection. Pay attention as follows:
charging the battery for first 5 times should be not less than 8 hours, but
not more than 12 hours. When charging, bear in mind that the charger
operation method.
3. The battery should be fixed reliably to avoid damaging. Never throw, roll
and weight the battery when transferring it.
4. Keep the battery dry, clean to prevent the self-discharge too much.
5. Avoid losing electricity for a long time. As a rule, charge the battery in time
after using the vehicle every day. During long-term storage of vehicle,
remove the battery from the vehicle, and charge it, then put it in a cool and
dry place (
-
10
℃
~
25
℃
) Then recharge it (after stored for 10
~
15 days).
6. To protect the battery from damage, slowly start the vehicle to avoid
instantaneous discharging too much.
7. Battery discharges to the termination voltage, and continue to discharge,
called as over-discharge. Pay attention to not let the battery discharge
during riding. In order to maximize the life of the battery, charge it when
the battery discharged to 50%.
8. Avoid over-charging as follows, the battery can be charged for 2 hours
when the charger indicator lights all bright. This done, do not use the
battery immediately, let it rest for 10 minutes or so to use again.
9. Battery applicable ambient temperature: 15-45
℃
Optimum charging environment: 25
℃
10. Reduce temperature of battery as far as possible when charging battery
temperature, ensure good heat dissipation, and away from heat source.