Easy Light Deluxe
– ET1L
User’s Manual Rev. 0511 PM-R 14
WARNING:
Store batteries in the 'correct' position. (See Fig. 7).
Battery Replacement and Disposal
The
Easy Light Deluxe
battery pack contains two 12V maintenance-free
batteries. Replacement of the batteries is only permitted to an authorized
dealer.
Battery cells may emit minor acid fumes.
Batteries must be recycled. Disposals of potentially damaged batteries
present hazards of injury from acid leakage and environmental pollution.
NOTE: When removing a battery, always set it on cardboard, newspaper,
or surfaces that cannot be damaged by acid fumes or liquid from the bat-
tery.
6. MOVING AND TRANSPORTING YOUR
Easy Light Deluxe
6.1. Moving Your
Easy Light Deluxe
in Freewheel Mode when unfolded:
The Freewheel is used for releasing the brake and moving the
Easy
Light Deluxe
without operating the motor. There are two ways to enter the
freewheel mode: the switch on the controller cover (Fig. 1/13) and the
handle on the motor (Fig. 1A/15).
Switch: before activating, make sure your
Easy Light Deluxe
is switched
on. Turn freewheel switch to the "freewheel" position and push or pull the
Easy Light Deluxe
manually.
NOTE:
The Freewheel mode can only be activated
after
the battery is in
place and the power switch (Fig. 6/1) is turned on. Doing otherwise will
cause a fault situation indicated by rapid flashing of the Indicator light
(Fig. 6/4). See section 4.2.
Figure 7
