PREMIER MODEL
REMOTE CONTROL - WIRELESS
Should you need to order a replacement remote control for your bed, or, on the rare occasion that the remote control
loses communication with the base unit, you will have to perform this simple operation to allow the remote to communicate
with your base unit.
Matching your hand control to the bed
The bed must be in the FLAT position in order to program the remote to operate the base unit. If your
bed is not in the flat position start with Step 1. If it is already in the completely flat position proceed
to Step 2.
Step 1 – Returning the Bed to a Flat Position
Using a ballpoint pen, or other skinny blunt head item such as a paper clip, press and release the reset button. The motors
will activate and lower the head and foot section one at a time to the flat position. The bed is in the completely flat position
when the motors stop running.
Step 2 – Pairing the Remote Control to the Base
With the bed in the completely flat position, use a ballpoint pen, or other skinny blunt head item such as a paper clip,
to
press and hold
the reset button on the motor.
While pushing the RESET button, press and release any button on the hand control and then release the RESET button
on the motor. The hand control should now be able to operate the base unit.
If you have followed these directions and
are still having difficulty you can reach our
Customer Service Department at
1-800-523-5383
Monday - Friday from 9 am to 5 pm (East Coast Time).
GEN550 Premier Model Remote_Easy Rest 6/19/15 5:51 PM Page 2
