easyRAID S8
Serial ATA Disk Array Systems
23
3
Main
te
na
nce – Up
gr
adin
g
Mem
o
ry
2
Remove the screws from the daughterboard, then carefully lift the daughterboard
(A)
from the disk group controller
(B)
.
3
Pull the DIMM retaining clips away from the DIMM, then remove the DIMM. The
DIMM springs out of the socket.
4
Gently push the new DIMM into the socket at 45 degrees, then push the corners of the
DIMM down. The DIMM is secured by the DIMM socket retaining clips.
Note
The DIMM module will fit in only one direction. Do not force the
DIMM into place.
A
B
