background image

4

Compressor Placement

It is critical that the air compressors be protected from the weather. You will 

need to provide a shelter for your compressor to protect it from rain, snow and 

other harsh elements.
•  Be sure your shelter is adequately ventilated. A cooling fan may be 

necessary in warmer climates. Several cabinet options with fans are 

available.

•  Be sure the compressor does not sit directly on the ground, as the vibration 

from the motor will cause dust and dirt particles to be pulled into the motor 

and may cause premature failure. NOTE — Avoid areas with excessive 

dust, this can damage compressor.

•  If operating compressor in freezing climates do not place compressor 

in “heated” buildings. Warm air holds more moisture. This warm air may 

condensate and freeze in the colder outdoor 

line. 

•  Ensure that compressors are placed where 

they will not become flooded with water.

•  If possible, shaded areas are preferred.
•  In areas with limited electrical supply, 

compressors can be placed long distances 

from the pond edge. A remote access valve 

assembly can be fed from the compressor with properly sized tubing.

Cabinet Placement

•  If installing a Sentinel Deluxe Aeration System, place the cabinet on a level, 

unobstructed base to ensure the compressor does not overheat.

•  A post mounted cabinet should be kept free from high weeds and other 

obstructions to ventilation system.

Diffuser Placement

The amount of surface area an aeration system will effectively cover is greatly 

dependent on two factors - DEPTH and SHAPE. The deeper an air diffuser is 

located, the more boiling action it will create and a larger area will be aerated. 

The diagram below shows how much surface area is effectively aerated per 

air diffuser at various depths. Ponds that are irregular or odd shaped will also 

reduce size of aeration area — call our technical department for  

additional help.

Example:
Our PA34 pond aerator 

would aerate only 

1

/

8

 

of an acre if operated 

in 4' deep water, while 

aerating up to 1 acre if 

operating in 12' - 16' deep 

water.

The shape of a pond affects 

the amount of diffusers 

needed. Irregular shaped 

ponds often require multiple 

diffusers to adequately aerate 

entire water column.

Up

 to

 1

1

/

2

 acr

es in 16' - 20' dee

p w

ate

r

U

to

 1 

acr

e in 1

2' - 16' de

ep w

ate

r

U

to

 

1

/

2

 ac

re in

 8' - 12' d

eep

 w

ate

r

Up

 to

 

1

/

4

 a

cr

e in

 5' - 8' d

ee

p w

ate

r

Air Diffuser

Summary of Contents for PA10









Reviews: