6. All electrical work must be performed by a qualified technician. Always follow the
National Electrical Code (NEC) or the Canadian Electrical Code as well as all local,
state and provincial codes. Code questions should be directed to your local electri-
cal inspector. Failure to follow electrical codes and OSHA safety standards may result
in personal injury or equipment damage. Failure to follow manufacturer’s installation
instructions may result in electrical shock, fire hazard, personal injury or death, dam-
aged equipment, provide unsatisfactory performance and may void manufacturer’s
warranty.
Installation for LED Light:
1. Before installing the product make sure to check in the box for damaged or missing
parts. Contact EasyPro immediately if pieces are missing or damaged.
2. Disconnect power before installing the lights.
3. Place the light in the desired location of your water feature
or landscape.
4. Mount to pipe with supplied screws (Fig. 1).
5. Run the cable back to the transformer. Connect leads to
transformer.
6. Install transformer on a timer and enjoy.
800-448-3873 • Grant, Michigan
www.easypropondproducts.com • [email protected]
7013 • 3/16
Limited Warranty:
The BFL lights have a limited warranty against any mechanical or material defects for a period of
five years from the date of purchase. Limited warranty only covers properly installed and main-
tained units. BFL fixtures must be installed on a magnetic 12v AC low voltage system.
The limited warranty does not cover normal wear and tear, nor any deterioration suffered through
overloading, improper use, negligence or accident. Similarly, any modification made by the
purchaser to the product will cause the warranty to be null and void. All returned items will be
inspected to determine cause of failure before warranty is approved. Limited warranty does not
cover any cost associated with the installation or removal of the product subject to warranty
claim. An RA number must be obtained by calling EasyPro Pond Products at 800-448-3873.
It is your responsibility to pay the return shipping charges. Be sure to include the RA number,
original receipt (in the form of an invoice or sales receipt), name, return address and phone
number inside of the package. No warranty claims will be honored without the original receipt.
Ensure the product is properly packaged and insured for the replacement value. Damage due to
improper packaging is the responsibility of the sender.
The manufacturer or supplier shall not be held liable for any damages caused by defective com-
ponents or materials of this product; or for loss incurred because of the interruption of service;
or any consequential/incidental damages and expenses arising from the production, sale, use or
misuse of this product. The manufacturer or supplier shall not be held liable for any loss of fish,
plants or any other livestock as a result of any failure or defect of this product.
Fig. 1
