4.0 Getting Ready
5.0 Buttons & Function
4.1 Turn on / off Camera
4.2 Inserting the battery
4.3 Insert / Remove a Memory Card
4.4 Attaching Wrist Strap
Press the Power Button (approx. 2 seconds) to turn on the camera.
Press the Power Button again to turn off the camera.
1. Power off the camera.
2. Open the battery cover.
3. Insert the battery.
4. Close the battery cover.
The indication of the battery status.
(
): Battery power is full.
(
): Battery power is half drained.
(
): Battery power is drained. Replace with new battery.
The batteries may run out if kept inside the camera and
not in use for a long time.
The battery may not work normally under 0 C or over 40 C.
1. Power off the camera.
2. Insert the memory card into the card slot and press
it down until a click sound is heard.
3. Please press the memory card again to get it out once a click
sound happens.
There is no built-in flash memory.
When attaching the wrist strap, move the length adjustment buckle
slightly away from the end of the wrist strap.
o
o
Note:
5.1 Tele/Wide Button
Press the Tele button, the zoom bar
indicator will appear at the right side of the
LCD monitor. It shows the current zoom
status.
Image shooting : up to 8X.
The focus range : Normal : 1.2M ~ infinity
Macro : 20 cm
Note : Please make sure that the focus is set
correctly. Otherwise, the image will
be out of focus. Please push the focus
switch up to start Macro function. The
Macro icon "
" will appear on the
LCD monitor.
5.2 Focus Switch
4
00100
00100
