15
Handling Notice before Use
：
* Check carefully if there is any dust, hair, or substance on the O-‐ring. Clean it
before placing the camera in the housing, or it may cause a leak.
* Check the battery power and insert the memory card into the camera.
Make sure the camera operation with the housing is normal.
* Test the housing without the camera in fresh water and make sure there is
no leak. After testing, wipe off all moisture from the housing with dry, clean
cloth before placing the camera.
Handling Notice during use
：
* Avoid any strong impact on the housing, or it may cause a leak.
* If the housing leaks during use, turn off the power and leave water
immediately. After the housing is cleaned and dried, remove the housing to
take out the memory card and battery, and send the camera and housing
back to the seller for repair at once.
* Do not open the housing in water, or it will cause a leak and damage the
camera.
* If changing the memory card or battery, rinse the housing with fresh water
first and then wipe off all moisture with clean cloth. After it’s cleaned and
dried, remove the housing to change the card or battery.
Maintenance
：
* After underwater use, rinse the housing with non-‐salt, fresh water, and
then wipe off all moisture with clean cloth. After it’s cleaned and dried,
take out the camera, and leave the housing (close) in fresh water about 30
minutes for clean again. If not doing this, the salt may still leave on the seal
and the hinge pin, and furthermore, it will cause the corrosion on the hinge
pin and the seal. If this results in the leak and damage the housing/camera,
the warranty won’t cover this failure
* Don’t apply any grease or use any cleaner to the O-‐ring. To clean the O-‐ring
seal, rinse it in fresh water, and then shake dry. Don’t use the cloth to dry it,
or the lint may leave on the O-‐ring.
* For storage, please leave the housing open in a cool place.
Summary of Contents for Goxtreme Deep Sea
Page 1: ...Instruction Manual...
Page 4: ......
