Set-up
To drive the machine press either the forward drive button (left
hand arrow) for continuous drive or step button (middle arrow)
for the foot switch. The foot switch over rides the magic eye, it is
advisable to start the machine with the foot pedal & then press the
continuous button when running.
The films will then begin to be drawn through the machine.
NOTE: When using continuous mode if the ‘magic eye’ sensor is
blocked by material or hands the machine will stop - to over ride the
sensor press the foot pedal.
You can adjust the rate at which the machine laminates by turning
the ‘speed control knob’ up to a maximum of 6m/min.
12