EN
Operating Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to your provider’s charges.
All rights reserved.
NOTICE – risk of material and property damage
■
Do not connect the product to a computer, as the high charging
current could damage the computer.
■
Do not use if there is visible damage to the product or the con-
nection.
■
Do not cover the product during operation, and ensure that
there is sufficient air circulation.
■
Protect the product from: impact, direct sunlight, sub-zero tem-
peratures.
■
Do not place any heavy objects on the product or its connec-
tion.
■
Lay the connection in such a way that it is not crushed or bent
and does not come into contact with hot surfaces.
■
Turn off and unplug the product immediately in case of damage
or malfunction.
■
Unplug the power adapter from the outlet before a storm.
■
Only use original accessories from the manufacturer so as not
to impair the functioning of the product and to prevent possible
damage.
■
To protect the surface, do not use corrosive or abrasive clean-
ers. Wipe the product with a damp cloth as required. Then dry
it off.
Included in delivery
1 x luminaire with support leg (3 parts) and base plate
1 x USB cable
(A connector to micro B connector)
1 x operating instructions
Check the scope of delivery for completeness, and the compo-
nents for transport damage. If the product is damaged, do not use
the product, but contact customer service immediately.
A USB mains adapter (5 V 1000 mA) is also required. This is
not included in the delivery!
Product overview
2
4
5
7
1
8
3
6
5
Switch
6
Lamp head
7
LED
8
Support leg
9
Base plate
10
Socket
11
Flexible lamp neck
12
Indicator light
Before first use
1.
Remove any possible fi lms, stickers or transport protection
from the product.
Never remove the type labels!
2.
Screw the flexible lamp neck (
7
), poles of the support leg (
4
)
and the base plate (
5
) together.
3.
Charge the battery (see the chapter “Charging the battery”).
Charging the battery
PLEASE NOTE!
■
Use a USB mains adapter that is designed for 5 V and at least
1000 mA. Do not connect to a computer!
■
Make sure the power outlet the USB mains adapter is plugged
into has been properly installed. The socket must be easily ac-
cessible, so that the network connection can be quickly discon-
nected.
1. Connect the USB cable to the lamp’s socket (
6
) and a USB
mains adapter.
2. Plug the USB mains adapter into a socket. The indicator
light (
8
) will light up while charging.
When the indicator light goes out, the battery is fully charged.
3. After charging, unplug the USB mains adapter from the socket
and then the USB cable from the lamp’s socket.
Usage
1. Place the lamp on a dry, level surface.
2. Turn the lamp head (
2
) to the desired position.
3. Tap the switch (
1
) to operate the lamp:
1 tap: warm white light
2 taps: universal white light
3 taps: cool white light
4 taps: Off
4. To set the brightness, keep the switch pressed while the lamp
is on.
Technical data
Article number:
07725
Model number:
LPSRFL11
Colour temperature:
2800 / 5200 / 6500 K
Brightness:
max. 330 lm
Ra:
> 80
Power supply:
5 V DC 1 A (LiPo battery 3,7 V 5000
mAh)
Charging time:
approx. 8 hours
Operational life:
approx. 5 – 6 hours (fully charged bat-
tery), depending on the brightness level
Power:
5 W
Operating instructions ID: Z 07725 M DS V1 0120 md
Disposal
Dispose of packaging materials in an environmentally
sound way and take recyclables to collection facilities.
This product is subject to European Directive
2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE). Do not dispose of the product
with built-in battery as normal household waste, but
through an authorised waste disposal company in
an environmentally friendly way.
Article number: 07725
