EasyLine MC/1800, Use And Maintenance

Page: 77 / 297

- 33 - English language
???
ID
M
EN
ID
M
-34607400200.
tif
"Open Door" mode (Pause)
The "Open Door" mode allows users
to temporarily stop the cooking cy-
cle, should it be necessary to check
the product inside the appliance.
– Open the door during the cook-
ing cycle to activate the "Open
Door" mode.
The appliance switches to
"Standby" mode if no command
is given after 60 seconds (de-
fault).
– If one of the buttons (G) is
pressed once the door is
closed, cooking starts and dis-
play (A) shows the remaining
time, based on the given com-
mand.
– The "Open Door" mode activates
upon opening of the door during
cooking and the timer on display
(A) stops until the door is closed
again and button (F) is pressed.
The appliance restarts cooking
and the timer its countdown from
where it was previously interrupt-
ed.
– Press button (E) to activate the "Open Door" mode during cooking, without opening the
door. The timer on display (A) stops and only restarts after button (F) is pressed.
Important
The "Standby" mode activates after 60 seconds (default) in "Open Door" mode.
In all other cases the appliance is in "Ready" mode.
If the settings are changed and "OP:61" is set (default), the appliance will not enter pause
mode when the door is opened but it deletes the commands pre-set by the user and awaits
new commands or activates the "Standby" mode after 60 seconds of inactivity.
ID
M
-34607400
200.
tif